This compact GB/T portable EV charger is rated at 13A on 220V AC for dependable everyday charging. It’s a practical choice for drivers and operators who need a simple Mode 2 solution without a fixed installation.
It is designed for EVs with GB/T inlets only and includes built-in protections such as leakage current, over/under-voltage, over/under-current, over-temperature, grounding detection, lightning protection, and automatic power-off. Clear LED status helps users confirm charging and diagnose faults quickly.

OEM/ODM options are available for branding and packaging. The product is covered by a two-year limited warranty (terms apply).

Universal Compatibility
Built for EVs with GB/T inlets only. Do not use this charger on vehicles with other inlet types.
Durable Design
A compact enclosure and flexible cable are designed for everyday handling. When not in use, store the charger in a clean, ventilated indoor environment and avoid sharp bends or heavy pressure on the cable.
Safety Features
Built-in protections include leakage current, over/under-voltage, over/under-current, over-temperature, grounding detection, lightning protection, and automatic power-off. Do not use with an extension cord or adapter, and do not disconnect plugs while charging.
Weather Resistant
The enclosure is rated IP66 for typical outdoor conditions. Do not use the charger in water or allow immersion, and disconnect the device during thunderstorms.
Easy Installation and Use
Insert the power plug firmly into a properly grounded outlet. Then fully insert the GB/T connector into the vehicle inlet until it is securely seated. Stop charging from the vehicle side before unplugging the charger.
Exceptional After-Sales Support
Backed by a two-year limited warranty. For faster support, share the model number and the LED fault code shown during the charging process.
Which vehicles is this charger compatible with?
It is designed for EVs with GB/T inlets only. Do not use it for other inlet types.
What are the rated voltage and current?
This model is rated 220V AC at 50/60Hz with a nominal current of 13A.
Can I use an extension cord or plug adapter?
No. Do not use this device with an extension cord or adapter. Use a properly grounded outlet.
What does a red LED fault code mean?
A red LED indicates a fault. For example, 2 flashes may indicate overvoltage, 3 flashes overcurrent, 8 flashes leakage current detected, and steady red may indicate a ground fault.
Is it OK to use outdoors?
The enclosure is rated IP66, but do not use it in water or allow immersion. Disconnect during thunderstorms.
What warranty is provided?
A two-year limited warranty applies (terms and exclusions apply).